posted

0 Comments

  1. Status of TLSv1.1/1.2 Enablement and TLSv1.0 Disablement across VMware products
  2. Thick-provisioned VMs onhttps://kb.vmware.com/s/article/ vSAN detected on vSAN-health check
  3. “Host cannot communicate with all other nodes in vSAN enabled cluster” error
  4. VASA Provider Registration Troubleshooting
  5. vSAN Health Service – Online Health – Controller Utility Is Installed on Host
  6. Unable to retrieve vSAN related information via HTML5 client after upgrading to vSphere 6.7 Update 3
  7. vSAN cluster displays incorrect capacity information showing 0 Bytes used and 0 Bytes free
  8. Network diagnostic mode health check warning in cluster configuration consistency check
  9. vSAN Health Service – Limits Health – After one additional host failure
  10. “Cannot complete file operation” error during vSAN VM creation
  11. vSAN Health Service – Online Health – vSAN Support Insight
  12. Virtual Machines running on VMware vSAN 6.6 and later report guest data consistency concerns following a disk extend operation
  13. vSAN Health Service – Cluster Health – Time Synchronization Across Hosts and VC
  14. vSAN cluster summary tab shows health alarm ” vSAN object health ” Home Object ” “After 1 additional host failure” ” Host with connectivity issues”
  15. vSAN HCL DB up-to-date health check is red for the fresh deployment without internet access
  16. Best practices for vSAN implementations using Dell PERC H730 or FD332-PERC storage controllers
  17. Unable to upload, copy or create files in a VMware vSAN-backed datastore
  18. Initializing vSAN during boot takes a longer time
  19. vSAN Health Service – Cluster – Disk format version
  20.  “Virtual SAN Disk Balance” warning alarm in a vSAN 6.2 Stretched Cluster