posted

0 Comments

  1. Status of TLSv1.1/1.2 Enablement and TLSv1.0 Disablement across VMware products
  2. Thick-provisioned VMs on vSAN detected on vSAN-health check
  3. “Host cannot communicate with all other nodes in vSAN enabled cluster” error
  4. vSAN Health Service – Online Health – Controller Utility Is Installed on Host
  5. VASA Provider Registration Troubleshooting
  6. Unable to retrieve vSAN related information via HTML5 client after upgrading to vSphere 6.7 Update 3
  7. Virtual Machines running on VMware vSAN 6.6 and later report guest data consistency concerns following a disk extend operation
  8. VSAN cluster would display incorrect capacity information with 0 Bytes used and 0 Bytes free
  9. Network diagnostic mode health check warning in cluster configuration consistency check
  10. “Cannot complete file operation” error during vSAN VM creation
  11. Issues with Custom Certificates from vSAN 6.5 and newer releases
  12. Unable to upload, copy or create files in a VMware vSAN-backed datastore
  13. vSAN cluster summary tab shows health alarm ” vSAN object health ” Home Object ” “After 1 additional host failure” ” Host with connectivity issues”
  14. “Virtual SAN Disk Balance” warning alarm during vSAN health check
  15. VMware vSAN 6.x health plug-in fails to load with the error: Unexpected status code: 400
  16. Initializing vSAN during boot takes a longer time
  17. “The ramdisk “vsantraces” is full” error reports in vSAN logging
  18. vSAN Health Service – Cluster – Disk format version
  19. Best practices for vSAN implementations using Dell PERC H730 or FD332-PERC storage controllers
  20. vSAN HCL DB up-to-date health check is red for the fresh deployment without internet access