posted

0 Comments

  1. Status of TLSv1.1/1.2 Enablement and TLSv1.0 Disablement across VMware products
  2. Thick-provisioned VMs on vSAN detected on vSAN-health check 
  3. “Host cannot communicate with all other nodes in vSAN enabled cluster” error 
  4. vSAN Health Service – Online Health – Controller Utility Is Installed on Host 
  5. Virtual Machines running on VMware vSAN 6.6 and later report guest data consistency concerns following a disk extend operation
  6. VASA Provider Registration Troubleshooting 
  7. “Cannot complete file operation” error during vSAN VM creation
  8. VSAN cluster would display incorrect capacity information with 0 Bytes used and 0 Bytes free
  9. Network diagnostic mode health check warning in cluster configuration consistency check
  10. Best practices for vSAN implementations using Dell PERC H730 or FD332-PERC storage controllers
  11. Issues with Custom Certificates from vSAN 6.5 and newer releases
  12. Unable to upload, copy or create files in a VMware vSAN-backed datastore
  13. “Virtual SAN Disk Balance” warning alarm during vSAN health check
  14. Initializing vSAN during boot takes a longer time 
  15. “Unexpected VMware Update Manager (VUM) baseline creation failure” error in vSAN Build Recommendation Engine Health
  16. vSAN HCL DB up-to-date health check is red for the fresh deployment without internet access
  17. vSAN cluster summary tab shows health alarm ” vSAN object health ” Home Object ” “After 1 additional host failure” ” Host with connectivity issues” 
  18. vSAN Health Service – Cluster – Disk format version
  19. vSAN Host Not Contributing Stats reports with SSL error
  20. “The ramdisk “vsantraces” is full” error reports in vSAN logging