Here is our Top 20 vSAN articles list for February 2017. This list is ranked by the number of times a VMware Support Request was resolved by following the steps in a published Knowledge Base article.
- VMware vSAN 6.0 Requirements
- Update sequence for vSphere 6.5 and its compatible VMware products
- Component metadata health check fails with invalid state error
- Required vSAN and ESXi configuration for controllers based on the LSI 3108 chipset
- FAQ: Support statement for 512e and 4K Native drives for VMware vSphere and vSAN
- vSAN upgrade requirements
- vSAN 6.2 increase in used disk space with All-Flash and Deduplication
- vSAN APD message that can be safely ignored: Unable to register file system <UUID> for APD timeout notifications: Inappropriate ioctl for device
- VMware vSAN in cluster XXX in datacenter YYY does not have capacity
- Best practices for vSAN implementations using Dell PERC H730 or FD332-PERC storage controllers
- How to format vSAN Disk Groups with a legacy format version
- vSAN 6.2 hybrid disk group performance degradation
- How to use and interpret performance statistics collected using vSAN Observer
- “Virtual SAN Disk Balance” warning alarm during vSAN health check
- vSAN memory or SSD congestion reached threshold limit
- Recommended settings for RAID0 logical volumes on certain 6G LSI based RAID vSAN
- Adding additional hosts to an existing vSAN cluster
- VMware vSAN 6.x health plug-in fails to load with the error: Unexpected status code: 400
- vSAN Health Service – Cluster – Disk format version
- vSAN 6.1/5.5 Update 3 Disk Groups show as Unmounted in the vSphere Web Client (DDH)
